Contact us
Tel:0574-86810961
Fax:0574-86810960
- Exhibition
- Intruduction
- Parameter
- case
Augers Drill are available with all major standard hubs on the market,including:2",2.5",3",and 4": Hex
50mm,2" and 65mm Round 57mm,75mm,100mm,110mm and 130mm square...to name but a few.
We know that our Augers can expect a tough life so we only use the highest grade steel and vary our tube
size according to machine size and application.Our Augers have a reputation of being the toughest on the
market.By working with and ,more importantly,listening to operators feedback we have developed the
perfect pitch for our flights.
It will cut at it's maximum efficiency and,most importantly the spoil will stay on your Auger when you remove
it from the hole.Our boring heads are designed with a Constant Spiral Cut.Teeth are located so that each make
its own fresh cut on every revolution and are angled to direct spoil towards the centre of the auger.The tooth
cutting angle ensures spoil is broken up thoroughly to avoid any clogging. Auger Torque Augers are offered
with many different tooth and pilot options to suit your specific need.For example in the S4 range we offer up
to eight different combinations and we have the know how to help you select the optimal configuration.
Model | Unit | Z2500 | Z3000 | Z3500 | Z4000 | Z6000 | Z8000 |
Approx. of | T | 1.5-3 | 2-4 | 2.5-4.5 | 3-5 | 4.5-6 | 5-7 |
Torque | N.m | 790-2593 | 1094-3195 | 1374-3578 | 1710-4117 | 2570-6917 | 3163-8786 |
Pressure | Bar | 70-240 | 80-240 | 80-240 | 80-240 | 80-240 | 80-240 |
Flow | Lpm | 25-65 | 25-70 | 40-80 | 50-92 | 40-89 | 48-110 |
Speed | Rpm | 36-88 | 30-82 | 35-75 | 35-68 | 20-46 | 20-45 |
Output Shaft | mm | 65Rnd | 65Rnd | 65Rnd | 65Rnd | 75Sq | 75Sq |
The weight of Driving head | kg | 47.5 | 70.2 | 70.8 | 71.5 | 114.5 | 125.8 |
The lenght of Driving head | mm | 595 | 700 | 700 | 700 | 700 | 700 |
The diameter Driving head | mm | 200 | 238 | 238 | 238 | 270 | 270 |
The lenght of Drill pipe | m | 1.2 | 1.2 | 1.2 | 1.2 | 1.5 | 1.5 |
The diameter of Drill pipe | mm | 100-500 | 100-600 | 100-750 | 100-900 | 150-750 | 150-900 |
Model | Unit | Z9000 | Z15000 | Z20000 | Z25000 | Z30000 | Z59000 |
Approx. of | T | 6-8 | 10-15 | 12-17 | 15-22 | 17-25 | 20-35 |
Torque | N.m | 3854-9961 | 5307-15967 | 6715-20998 | 8314-25768 | 15669-30393 | 27198-59403 |
Pressure | Bar | 80-240 | 80-240 | 80-240 | 80-240 | 80-240 | 80-240 |
Flow | Lpm | 70-150 | 80-170 | 80-170 | 80-170 | 100-170 | 100-250 |
Speed | Rpm | 23-48 | 19-41 | 15-32 | 12-26 | 12-21 | 10-22 |
Output Shaft | mm | 75Sq | 75Sq | 75Sq | 75Sq | 75Sq | 110Sq |
The weight of Driving head | kg | 126.8 | 154.4 | 161 | 374 | 390 | 465 |
The lenght of Driving head | mm | 930 | 930 | 930 | 1290 | 1350 | 1630 |
The diameter Driving head | mm | 290 | 290 | 290 | 410 | 410 | 410 |
The lenght of Drill pipe | mm | 1500 | 1750 | 17500 | 2300 | ▬ | 2300 |
The diameter of Drill pipe | mm | 150-900 | 150-900 | 150-900 | 300-1200 | ▬ | 300-1500 |
Ningbo Kemer Engineering Machinery Co.,Ltd