Contact us
Tel:0574-86810961
Fax:0574-86810960
- Exhibition
- Intruduction
- Parameter
- case
GN series hydraulic motor is a new type of product of our company, which based on years practical
experience and designed and improved the original products on the basis of Italian technologies.
GN hydraulic motor mainly has the following characteristics:
(1) As the piston and the tilt cylinder have no side force ,the piston bottom is designed to be static
pressure balance. The torsional force is transferring between the piston and the crankshaft through
rolling bearing, so the friction loss during the transferring process of force is reduced. Therefore,
GN series hydraulic motor has such features as: very high mechanical efficiency and comparatively
high startup torque (mechanical efficiency of over 0.92 during startup).
(2) The plane distributor (patented technology) is simple and reliable with perfect seal performance
and almost no leakage. The plastic piston ring is used to seal between the piston and the tilt cylinder,
so it has very high volumetric efficiency(can be as high as 0.98).
(3) As the structure of this product has reduced friction loss and enhanced the seal performance, the
product has perfect stability at low speed. It can stably run at 1r/min working condition and has
big speed regulation range.
(4) As the piston is jointed closely with bearing bushing without any clearance, this series of hydraulic
motor can run at pump working condition.
(5) This series of hydraulic motor has high pressure, light weight, small bulk and high specific power.
(6) As this series hydraulic motor has simple structure, reasonable design and adopts bearing with big
load ability,it can work reliably and has long life and low noise;the transmission shaft allows endure
radial load and the rotational direction is reversible.
GN05 SERIES
Technical Parameter | Units | 05-110 | 05-130 | 05-150 | 05-170 | 05-200 |
Theoretical Displacement | ml/r | 115 | 129 | 151 | 166 | 191 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 458 | 513 | 600 | 660 | 760 |
Unit Theoretical Torque | N.m/Mpa | 18.3 | 20.5 | 24 | 26.4 | 30.4 |
Max.Power | Kw | 20 | 20 | 20 | 20 | 20 |
Max.Speed | r/min | 900 | 900 | 900 | 800 | 800 |
Weight | Kg | 22 | 22 | 22 | 22 | 22 |
GN1 SERIES
Technical Parameter | Units | 1-100 | 1-150 | 1-175 | 1-200 | 1-250 | 1-300 | 1-320 | 1-350 |
Theoretical Displacement | ml/r | 99 | 154 | 172 | 201 | 243 | 290 | 314 | 340 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 20 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 385 | 600 | 670 | 785 | 950 | 1130 | 1225 | 1060 |
Unit Theoretical Torque | N.m/Mpa | 15.4 | 24 | 26.8 | 31.4 | 38 | 45.2 | 49 | 53 |
Max.Power | Kw | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
Max.Speed | r/min | 1000 | 1000 | 900 | 800 | 700 | 650 | 600 | 650 |
Weight | Kg | 31 | 31 | 31 | 31 | 31 | 31 | 31 | 31 |
GN2 SERIES
Technical Parameter | Units | 2-300 | 2-350 | 2-420 | 2-500 | 2-600 | 2-630 |
Theoretical Displacement | ml/r | 304 | 347 | 425 | 493 | 565 | 623 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 1188 | 1355 | 1658 | 1923 | 2208 | 2433 |
Unit Theoretical Torque | N.m/Mpa | 47.5 | 54.2 | 66.3 | 76.9 | 88.3 | 97.3 |
Max.Power | Kw | 59 | 59 | 59 | 59 | 59 | 59 |
Max.Speed | r/min | 750 | 750 | 750 | 700 | 700 | 650 |
Weight | Kg | 51 | 51 | 51 | 51 | 51 | 51 |
GN3 SERIES
Technical Parameter | Units | 3-500 | 3-600 | 3-800 | 3-900 | 3-1000 |
Theoretical Displacement | ml/r | 486 | 595 | 792 | 873 | 987 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 1895 | 2320 | 3100 | 3400 | 3850 |
Unit Theoretical Torque | N.m/Mpa | 75.8 | 92.8 | 124 | 136 | 154 |
Max.Power | Kw | 80 | 80 | 80 | 80 | 80 |
Max.Speed | r/min | 600 | 575 | 500 | 400 | 400 |
Weight | Kg | 87 | 87 | 87 | 87 | 87 |
GN4 SERIES
Technical Parameter | Units | 4-900 | 4-1000 | 4-1100 | 4-1300 |
Theoretical Displacement | ml/r | 904 | 1022 | 1116 | 1316 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 3525 | 4000 | 4350 | 5125 |
Unit Theoretical Torque | N.m/Mpa | 141 | 160 | 174 | 205 |
Max.Power | Kw | 100 | 100 | 100 | 100 |
Max.Speed | r/min | 450 | 400 | 400 | 350 |
Weight | Kg | 120 | 120 | 120 | 120 |
GN5 SERIES
Technical Parameter | Units | 5-1450 | 5-1600 | 5-1800 | 5-2000 |
Theoretical Displacement | ml/r | 1462 | 1634 | 1816 | 2007 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 5700 | 6350 | 7075 | 7825 |
Unit Theoretical Torque | N.m/Mpa | 228 | 254 | 283 | 313 |
Max.Power | Kw | 120 | 120 | 120 | 120 |
Max.Speed | r/min | 350 | 300 | 300 | 250 |
Weight | Kg | 175 | 175 | 175 | 175 |
GN6 SERIES
Technical Parameter | Units | 6-1700 | 6-2100 | 6-2500 | 6-3000 |
Theoretical Displacement | ml/r | 1690 | 2127 | 2513 | 3041 |
Rated Pressure | Mpa | 25 | 25 | 25 | 25 |
Max.pressure | Mpa | 31.5 | 31.5 | 31.5 | 31.5 |
Rated Torque | N.m | 6600 | 8300 | 9800 | 11875 |
Unit Theoretical Torque | N.m/Mpa | 264 | 332 | 392 | 475 |
Max.Power | Kw | 170 | 170 | 170 | 170 |
Max.Speed | r/min | 400 | 350 | 300 | 250 |
Weight | Kg | 275 | 275 | 275 | 275 |
Ningbo Kemer Engineering Machinery Co.,Ltd